The Beddoes Products Plain Tile Vent has a simple structure to match standard 265mm x 165mm plain tiles. Sleek design ensures the vent is almost invisible from ground level. Water entering the vent flows back out onto the roof.
Concrete, clay or machine made plain roof tiles.
Length of tile area – 265 mm
Length (total) – 337 mm including flange/overlap
Width (total) – 495 mm
Width of 1 tile – 165 mm per tile (3 tiles in total)
The Beddoes Products Plain Tile Vent gives a discreet solution to 2 problems:
Ventilation of a roof space
A retrofit solution to condensation in the roof space.
Soil or mechanical extraction
A terminal for soil vent pipes or mechanical extraction units - most commonly bathroom extraction.
Airflow resistance charts are available on request to check compatibility for other purposes.
Country of Manufacture
Produced in a 3 tile format with an upper cover containing a grille in the visible area of the tile.
An underbase collects and discharges rainwater back to the roof.
The 4mm grille allows an airflow capacity of 7,500mm² per unit.
One tile vent at 0.75 metre centres achieves the equivalent of 10,000mm² per linear metre at low level.
One tile vent at 1.50 metre centres achieves the equivalent of 5,000mm² at high level.
Airflow resistance charts are available on request to determine extraction unit compatibility.
Over 22.5 degrees.
Installation is simple.
One unit replaces 3 tiles. No tile or batten cutting is required. The roofing felt needs a diagonal cut for the throat of the ventilator to pass through.
Cut and fold out the felt underlay. Position the tile vent. Nail securely and continue tiling.
You can select your colour from the colour drop down menu.
You can request a colour match by email to firstname.lastname@example.org or phone on 07977748593.
Suitable for situations where only ventilation is required. If you aren’t connecting to any pipe work now or in the future, the ‘vent only’ option is all you require.
Vent + Pipe Adaptor
The pipe adaptor has a 110mm diameter and connects the roof tile vent to extraction units via existing pipe work.
Vent + Pipe Adaptor + Flexible Pipe
The flexible pipe provides a high quality flexible connection between the roof tile vent and existing pipe work. It can extend between lengths of 250mm - 550mm. Adjustable ties allow diameters between 120mm - 77mm.