Inline Slate Roof Tile Vent 600 x 300 mm (24 x 12 inch)
Inline Slate Vent 600 x 300 mm
The Beddoes Products Inline Slate Vent has a simple structure to match standard slate roof tiles. Sleek design ensures the vent is almost invisible from ground level. Water entering the vent flows back out onto the roof.
Roof Slate - 24 x 12 inches
Length - 600 mm
Width - 300 mm
A Beddoes Products Inline Slate Vent gives a discreet solution to 2 problems:
Ventilation of a roof space
A retrofit solution to condensation in the roof space.
Soil or mechanical extraction
A terminal for soil vent pipes or mechanical extraction units - most commonly bathroom extraction.
Airflow resistance charts are available on request to check compatibility for other purposes.
Installation is simple.
Product fitting instructions included.
Country of Manufacture
Upper cover containing a grille in the visible area of the tile.
An underbase collects and discharges rainwater back to the roof.
The 4mm grille allows an airflow capacity of 10,000mm² per unit.
The grille also acts as an insect screen and a baffle against wind-driven rain.
Over 22.5 degrees.
Suitable for situations where only ventilation is required. If you aren’t connecting to any pipe work now or in the future, the ‘vent only’ option is all you require.
Vent + Pipe Adaptor
The pipe adaptor has a 110mm diameter and connects the roof tile vent to extraction units via existing pipe work.
Vent + Pipe Adaptor + Flexible Pipe
The flexible pipe provides a high quality flexible connection between the roof tile vent and existing pipe work. It can extend between lengths of 250mm - 550mm. Adjustable ties allow diameters between 120mm - 77mm.
We accept credit card, debit card or PayPal payments.
Free on all orders.
Royal Mail 24 hour service.
1-2 days dispatch time.
Returns accepted within 30 days of purchase.
Click Returns Policy at the bottom of the homepage for details.